Skillnad mellan versioner av "Ultimaker 2+"

Från Karlskrona Makerspace Wiki
Hoppa till: navigering, sök
(16 mellanliggande versioner av samma användare visas inte)
Rad 1: Rad 1:
 +
Pålitlig, effektiv och användarvänlig arbetshäst som tack vare sitt stöd av ett brett utbud av material gör den lämplig för ett stort antal applikationer, från prototyper till anpassade verktyg. Det är en bra 3D-skrivare som ger konsekventa resultat.
  
[[File:Ultimaker 2 plus.jpg|400px]]
+
[[File:Ultimaker 2 plus.jpg|250px]]
  
 
== Programvara ==
 
== Programvara ==
Ultimaker CURA: [https://ultimaker.com/en/products/ultimaker-cura-software]
+
[[Ultimaker Cura]]<ref>Ultimaker Cura 3D Printing Software, URL: [https://ultimaker.com/en/products/ultimaker-cura-software https://ultimaker.com/en/products/ultimaker-cura-software]</ref>
  
 
== Material ==
 
== Material ==
PLA
+
PLA, ABS, CPE, CPE+, PC, Nylon, TPU 95A
ABS
+
 
 +
(open filament system:
  
 
== Data ==
 
== Data ==
  
 
=== Lagertjocklek ===
 
=== Lagertjocklek ===
 
+
600 micron till 20 micron
  
 
=== Byggvolym ===
 
=== Byggvolym ===
 
223 x 223 x 205 mm (b/d/h)
 
223 x 223 x 205 mm (b/d/h)
 +
 +
=== Bygghastighet ===
 +
24 mm3/s
 +
 +
== Mer information ==
 +
Ultimaker 2+ Produktsida<ref>Ultimaker 2+ 3D Printer produktsida, URL: [https://ultimaker.com/en/products/ultimaker-2-plus https://ultimaker.com/en/products/ultimaker-2-plus]</ref>
 +
 +
Ultimaker 2+ Supportsidor<ref>Ultimaker 2+ 3D Printer supportsidor, URL: [https://ultimaker.com/en/resources/18767-unboxing https://ultimaker.com/en/resources/18767-unboxing]</ref>
 +
 +
==Referenser==
 +
<references />
 +
 +
 +
[[Category: 3D Printers]]

Versionen från 8 april 2018 kl. 17.13

Pålitlig, effektiv och användarvänlig arbetshäst som tack vare sitt stöd av ett brett utbud av material gör den lämplig för ett stort antal applikationer, från prototyper till anpassade verktyg. Det är en bra 3D-skrivare som ger konsekventa resultat.

Ultimaker 2 plus.jpg

Programvara

Ultimaker Cura[1]

Material

PLA, ABS, CPE, CPE+, PC, Nylon, TPU 95A

(open filament system:

Data

Lagertjocklek

600 micron till 20 micron

Byggvolym

223 x 223 x 205 mm (b/d/h)

Bygghastighet

24 mm3/s

Mer information

Ultimaker 2+ Produktsida[2]

Ultimaker 2+ Supportsidor[3]

Referenser

  1. Ultimaker Cura 3D Printing Software, URL: https://ultimaker.com/en/products/ultimaker-cura-software
  2. Ultimaker 2+ 3D Printer produktsida, URL: https://ultimaker.com/en/products/ultimaker-2-plus
  3. Ultimaker 2+ 3D Printer supportsidor, URL: https://ultimaker.com/en/resources/18767-unboxing