Skillnad mellan versioner av "Ultimaker 2+"

Från Karlskrona Makerspace Wiki
Hoppa till: navigering, sök
Rad 3: Rad 3:
  
 
== Programvara ==
 
== Programvara ==
[[Ultimaker Cura]]: [https://ultimaker.com/en/products/ultimaker-cura-software]
+
[[Ultimaker Cura]]<ref>Ultimaker Cura 3D Printing Software, URL: [https://ultimaker.com/en/products/ultimaker-cura-software|https://ultimaker.com/en/products/ultimaker-cura-software]</ref>
  
 
== Material ==
 
== Material ==
Rad 22: Rad 22:
  
 
== Mer information ==
 
== Mer information ==
Ultimaker 2+ Produktsida<ref>[https://ultimaker.com/en/products/ultimaker-2-plus]</ref>
+
Ultimaker 2+ Produktsida<ref>Ultimaker 2+ 3D Printer produktsida, URL: [https://ultimaker.com/en/products/ultimaker-2-plus|https://ultimaker.com/en/products/ultimaker-2-plus]</ref>
  
Ultimaker 2+ Supportsidor: [https://ultimaker.com/en/resources/18767-unboxing]
+
Ultimaker 2+ Supportsidor<ref>Ultimaker 2+ 3D Printer supportsidor, URL: [https://ultimaker.com/en/products/ultimaker-2-plus|https://ultimaker.com/en/resources/18767-unboxing]</ref>
  
 
==Referenser==
 
==Referenser==

Versionen från 2 april 2018 kl. 16.34

Ultimaker 2 plus.jpg

Programvara

Ultimaker Cura[1]

Material

PLA, ABS, CPE, CPE+, PC, Nylon, TPU 95A

(open filament system:

Data

Lagertjocklek

600 micron till 20 micron

Byggvolym

223 x 223 x 205 mm (b/d/h)

Bygghastighet

24 mm3/s

Mer information

Ultimaker 2+ Produktsida[2]

Ultimaker 2+ Supportsidor[3]

Referenser

  1. Ultimaker Cura 3D Printing Software, URL: [1]
  2. Ultimaker 2+ 3D Printer produktsida, URL: [2]
  3. Ultimaker 2+ 3D Printer supportsidor, URL: [3]